Good day,
Another Opti-Coated BMW F10 520i since months back, this car condition is good. No major correction were carry out during preparation. Somehow, there is bird poop etched on the hood i didnt manage to remove cause its too deep. Without sacrificing too much of clear coat, i didnt go any further. Other panels such as doors, roof, rear bonnet were polished and finished with OHP. Finishing was done with Flex that i borrowed from Seech. Thanks!
As usual, this is the 7th F10 i detailed so far included another BMW F10 520d, i will post it up soon. I found all the BMWs have one same issue which have micro-marring on the paintwork that not properly finish by the previous detailer before sending to the owner. I really hope all the readers who wanted to invest a BMW should ask the dealer not to send for polish & wax session even tho its free. Here is very good example BMW F10 528i M-Sport which whacked by the previous detailer.
For not delaying, lets continue the article for today. firstly, i wash the car with ONR since there is not much dirt on the paintwork, surface were smoothen with PermaGlass, ONR as lube. Rims and tires were cleaned with DFX 1:1 and OPC 1:3, engine wiped down with Opti-Clean, paintwork polished with rotary and finished with Flex, wiped down with IPA and Opti-Coated all around except rims. Not much pictures taken during the process but hope you guys enjoy!
washing begins
bird poop
light water spot
first pass with double sided wool at speed 3
second pass
wiped down with IPA and ready to coat
after 3hours later, done
Thanks for reading.