Chemical Stain Etched On The Hood

i received a text message from one of my buddy last 2 days ago while i was at home. he mentioned that his car front hood kena some stain that cannot be removed by hand polishing, then he asked for my help immediately through message, so i invited him to my place to have a look.



at 1st i thought it was white cement stain but closely inspect i was wrong. i tried scratch lightly but it didnt came off, and then i use M105 with a applicator pad but still cant be removed. so i assume this is a chemical stain that alredi etched on the paint. take a closer look..



wet sanding begin since i have no other choice, start/finish with 2000grit. M105 with a cutting pad and finishing with OHP polishing with polishing pad and then protected with opti-seal and OCW.






close up





finally my buddy have relief when the stain is gone, no more struggling and headache and leave with a happy smile on his face. i feel happy for him too, maybe in a opposite way. hes happy cause the stain is gone, im happy cause i rescued another ride on that night. cheers!

Read more »

Micro-Marring

just about 2 weeks back i was trying to wet sand my entire surface using 1500grit - 2000grit sandpaper to remove orange peel. the wet sand process was bad at 1st cause im not using any sand block, my fingers applied different pressure on the surface and caused really deep scratches (samurai sword slashes around) after i purchased the sand block, i found out i can sand evenly with really nice haze on it and start to compound using M105 like usually how i do on other people cars. after compounded with M105 + wool the clarity appeared in seconds, like usually. then thought moving to cutting but i used halogen tripod to check it out 1st, i was really got shocked when there is swirls appeared on the surface. i told myself which steps i did wrong and caused swirls? really tiny one and look ugly. i stopped immediately and do more research later on cause i have tried many times and still fail.


this was took with led torch light


really tiny one that only can spotted under the sun or halogen light

after all the research i did on the net, i found my problem the swirls is actually micro-marring, maybe cause of the M105 is too abrasive. alot people commented how to remove it bla bla bla, make me so confused. i only believe one thing which is using non-abrasive polish to remove it and i decided to give it a shot. i choosed OHP with a double sided foam pad.





my the other surface look like this at 1st




close up

and then after compounded become like this..


close up

well, learn from the beginning and master it. 50/50 shots after polishing.




close up

and finishing..




finally i did and and feel so relief, i was thought im gonna drive swirls out under the sun. thank god i archive the result i want. i will still continue to gloss up my car by wet sanding and will post more pictures in future. stay tune!


thanks for viewing again.

Read more »

Grease, Dirt Received From Garage (Myvi SE) by mun

introduce you Team Crisis. this club was form in june 2010 last year, they are focus more on forced induction which produce more power on wheels, not forget they have their own garage which is Crisis Induction Garage, they also provide custom turbocharge/supercharge services. feel free to find them on facebook. back to topic, my buddy has alredi make appointment with me since 2 days ago when hes back from garage but due to my busy schedule i have no choice but to delay (took half day holiday) im so sorry buddy. well, this car received alot grease stains/dirt from the garage which he want me to remove it and the sadly part is the workers hand are dirty when they are installing parts for your car. please take note to all car enthusiasts.

example 1 when installing meter


example 2 when pushing the car really hard


example 3 this one i dont know where it came from


example 4 when opening the driver door


example 5 when opening rear bonnet


though are not any serious matter but is this consider abuse? i mean like dirty people's car, same theory as roadside car wash, they leave swirls on your paint and using detergents aka snow wash. power clean, soft bristle brush and tooth brush are my only option to clean. i dilute it on a tooth brush and quickly rinse off with onr. look at the picture below before and after cleaning.


before


after


before


agitating




before


after


rear bonnet before


rear bonnet after


driver door before


driver door after

after removed the grease from interior then move to door jambs area..


dirty dirt


agitating


ching ching ching!

another one




and more..














excuse me, my bad






eh? how come got reflection?


gotcha' dirty onr solution

specially thanks to OPT wonderful make product Optimum Power Clean which safe for clear coat


after done the door jambs then give this car a good bath with onr and then clay to remove paint roughness and tar.


before mixture


after 2 caps of onr


onr as lubrication



tar collected then onr wash again. power clean-ed whole paint surface and quickly rinse off with water, rims quick wash with left over onr solution then combo with Oos and OCW, both product spray buff/wipe walk off. some of the finishing picture..


















flickering after combo with opti-seal and OCW


dont judge a book by cover, you never know what actually inside




thanks for viewing again. cheers!

Read more »